JAMB Subject Combination for Wood Products Engineering

Contents

We are aware at mytopschools.com that you are searching for JAMB Subject Combination for Wood Products Engineering then you are not alone.

Engineered wood, also called mass timber, composite wood, man-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibres, or veneers or boards of wood, together with adhesives, or other methods of fixation to form composite material. The panels vary in size but can range upwards of 64 by 8 feet (19.5 by 2.4 m) and in the case of cross-laminated timber (CLT) can be of any thickness from a few inches to 16 inches (410 mm) or more. These products are engineered to precise design specifications, which are tested to meet national or international standards and provide uniformity and predictability in their structural performance.

Engineered wood products are used in a variety of applications, from home construction to commercial buildings to industrial products. The products can be used for joists and beams that replace steel in many building projects.^[4] The term mass timber describes a group of building materials that can replace concrete assemblies. Broad-base adoption of mass timber and their substitution for steel and concrete in new mid-rise construction projects over the next couple decades has the potential of turning timber buildings into a global carbon sink, which could help mitigate climate change.

Typically, engineered wood products are made from the same hardwoods and softwoods used to manufacture lumber. Sawmill scraps and other wood waste can be used for engineered wood composed of wood particles or fibers, but whole logs are usually used for veneers, such as plywood, medium-density fibreboard (MDF), or particle board. Some engineered wood products, like oriented strand board (OSB), can use trees from the poplar family, a common but non-structural species.

Wood-plastic composite, one kind of engineered wood

Alternatively, it is also possible to manufacture similar engineered bamboo from bamboo; and similar engineered cellulosic products from other lignin-containing materials such as rye straw, wheat straw, rice straw, hemp stalks, kenaf stalks, or sugar cane residue, in which case they contain no actual wood but rather vegetable fibers.

Flat-pack furniture is typically made out of man-made wood due to its low manufacturing costs and its low weight.

The Bachelor’s Degree in Wood Products Engineering is competitive. Knowing the prerequisites will enable you have seamless registration and also avoid unnecessary mistakes.

This page provides the following:

Wood Products Engineering O’Level Subjects and Requirements;
Wood Products Engineering Direct Entry Subject and Requirements;
Wood Products Engineering UTME Subjects Combination;
And other useful information that will enable you to make the right choices so that you gain admission to study Wood Products Engineering.

Please read the Wood Products Engineering programme admission requirements below carefully. If you meet the required prerequisites you may proceed with your UTME/Direct Entry registration.

PLEASE NOTE: There are variations to the requirements listed below in some universities. In that case, it’s advisable you make references to the PDF version of JAMB Brochure.